Customer Information

Here are some tips on how to make working with your battens easier:

-Inflate the board to 1-5psi when fitting or removing the batten.

- When fitting or removing the battens, put the board on its side and insert the first inch of the batten into the batten pocket. Then with your hand 6 inches away from the batten pocket, use a small pushing motion to put the batten into the pocket all the way until it reaches the end of the batten pocket.

- To take the batten out it is super easy, all you need to do is take the velcro tab off and with one long pull, remove the batten.

-You can use Vaseline or silicone spray on the batten to act as a lubricant if you feel necessary.